Features

The following features were specifically designed for this version of Cruzr:

Temperature monitoring

The thermal imaging camera will scan the face of every person passing by the camera. If the scan-results indicate that the conditions are met (e.g. detected temperature is higher than threshold or face mask is worn incorrectly), a photo will be taken of the person and an alarm-event will be sent to the robot and any connected ZBOS Control app.

Capturing photos may not be available in your region due to privacy legislation. For example, in the EU this feature is not activated in order to comply with GDPR-regulation.

The photos will be only be stored for a predefined interval on the robot, and when available, pushed to a cloud storage account.

Customizable options in ZBOS Control

Tap the gear-icon (ionicon gear) in the toolbar of the Monitoring-page in ZBOS Control to display the available options for the alarm-events:

control options

Mask

Enable

If this option is checked, an alarm will be sent when people are wearing their face mask incorrectly (or not at all).

Retention Days

Set the time for how long the images and alarm-events will remain stored locally on the robot.

Temperature

Enable

If enabled, an alarm will be sent when someone has been detected with a body temperature higher than the threshold.

Retention Days

Set the time for how long the images and alarm-events will remain stored locally on the robot.

Temperature threshold

Set the minimal detected temperature before an alarm will be sent (in degrees Celsius °C).

Tap the check-button (md check) in the top-right corner to apply the changes for new events.

Additional options

Each alarm-event will be sent with certain properties, which can be used to filter the list of events in ZBOS Control. Tap the filter-option (md funnel) in the Monitoring-page in ZBOS Control to display the available options:

alarm options

Filter by Type

Tap to toggle the display of alarm-events for:

  • Temperature-events

  • Mask-events

Filter Mask alarms

Tap to toggle the display of alarm events:

  • Yes: Someone was detected wearing a face mask correctly

  • No: Someone was detected wearing no face mask at all

  • Incorrectly: Someone was detected wearing a face mask incorrectly
This will only change the display of the items in ZBOS Control, the list of triggered events will still be available on the robot.