Robot Connection

Tap the option 'Robot Connection' in the menu to display the options for connecting ZBOS Control to a robot.

robotconnectionmodal

Tap the option 'Connection' to select how to connect Control to the robot.

connectiontypeselect

  1. Select the option 'Cloud' to connect using the internet

  2. Select the option 'Hotspot' to connect via the internal hotspot of the robot

  3. Select the option 'Local' to connect using the local wifi network

  4. Tap the button 'OK' to connect to the robot or the button 'Cancel' to keep the current configuration

Cloud connection

If the option 'Cloud' has been selected, the following options are available:

connection cloud

  1. Tap the option 'Robot name' to display the list of robots(1) linked to the account .

connection cloud robots

Tap a robot in the list and tap the option 'OK' to select the robot.

  1. Set the timeout to reconnect (optional)

  2. Tap the button 'Link robot' to add a new robot(2) (v2.0.0+) to the cloud account.

  3. Tap the button 'Add legacy robot' to add a robot (-v2.0.0) to the cloud account(3).

  4. Tap the button 'Connect' to connect to the selected robot or tap the button 'Cancel' to keep the current connection.

(1): At least one robot needs to be have been linked to the connected account.
(2): See the chapter Linking Wizard for more information.
(3): See the chapter Legacy connection for more information.

Hotspot connection

The tablet/smartphone needs to be connected to the hotspot of the device. This feature is only available on certain ZBOS products (e.g. James).

If the option 'Hotspot' has been selected, the following options are shown:

connection hotspot

  1. Tap the option 'Robot type' to select one of the pre-configured configurations (1)

connection hotspot types

  1. Enter the Hostname/IP configuration for the robot

  2. Set the timeout to reconnect (optional)

(1): Selecting the option 'James' will lock the IP configuration to match James’s configuration.

Local connection

If the option 'Local' has been selected, the following options are available:

connection local

  1. Tap the icon next to 'Hostname/IP list' to display a list of known robot-configurations(1).

connection local knownconfig

Tap the selected IP address to enter it in the required field.

  1. Tap the field 'Hostname/IP' to enter the configuration(2) for the robot on the local network

  2. Set the timeout to reconnect (optional)

  3. Tap the button 'Scan QR code' to scan the QR-code^(3) (4)^ shown on the robot to enter the information in the modal

  4. Tap the button 'Connect' to connect to the selected robot or tap the button 'Cancel' to keep the current connection.

(1): The list of IP addresses will only be shown if at least one connection has been made to a local IP address.
(2): The last entry will be remembered.
(3): ZBOS Control requires access to the camera of the smartphone/tablet.
(4): This option should only be used for legacy devices.